CL BRAKES RC6 (SINTERED/FULL RACE) REAR BRAKE PADS
$343.47
Availability : In stock
CL BRAKES RC6 (SINTERED/FULL RACE) REAR BRAKE PADS
CL Brakes RC6E (Sintered/Full Race) Rear Brake Pads
The first thing you’ll notice about them is the incredibly high, yet controllable bite. You’ll likely use less pedal pressure than you’re accustomed to, which means no more standing on your brake pedal praying for the car to stop while diving into turns. You’ll also have incredible cold bite, which is of great value to autoX and Time Attack participants, who typically have little or no time to warm up their brakes prior to timed runs. Regardless of your engine package, tires, or the track you’re driving, it’s highly unlikely that you’ll ever fade the RC6 compound. Since the material is so dense, the RC6 feels rock-hard underfoot. The RC6 has become a bread and butter pad among rally drivers in Europe due to its relentless bite in every imaginable track and weather condition. Most experienced drivers have a ‘wow’ moment the first time they drive the RC6, as they’ve never felt anything quite like it before. The RC6 is typically used on the front of most cars, although it’s a great rear pad option if RC8 is being used on the front.
Name - RC6
Composition - Sintered
Category - Full Race
Max Temp* - 1800F
Dust - High
Noise - High
Bite / Mu - Very High
Judder/Vibration - Low
Pad wear - Moderate
Rotor wear - Moderate
Because of their high metal content, CL Sintered Pads don’t rely on a pad transfer layer to generate high levels of friction. The only recommended bed-in after install is to do a few moderately hard stops to seat the pads flush with the rotor face. That’s it. When the pads heat to a certain point, they will deposit a layer material on the face of the rotors, just like other pad types. That pad transfer layer is extremely thin however, and contains graphite (a lubricant), which protects the rotors from wear. Because of the abrasive nature of the sintered material when cold, that thin transfer layer will quickly be removed from the rotors during any cold brake applications. The transfer layer of CL pads is essentially self-curing, and only develops when required to protect the rotors.
Name - RC6
Composition - Sintered
Category - Full Race
Max Temp* - 1800F
Dust - High
Noise - High
Bite / Mu - Very High
Judder/Vibration - Low
Pad wear - Moderate
Rotor wear - Moderate
Because of their high metal content, CL Sintered Pads don’t rely on a pad transfer layer to generate high levels of friction. The only recommended bed-in after install is to do a few moderately hard stops to seat the pads flush with the rotor face. That’s it. When the pads heat to a certain point, they will deposit a layer material on the face of the rotors, just like other pad types. That pad transfer layer is extremely thin however, and contains graphite (a lubricant), which protects the rotors from wear. Because of the abrasive nature of the sintered material when cold, that thin transfer layer will quickly be removed from the rotors during any cold brake applications. The transfer layer of CL pads is essentially self-curing, and only develops when required to protect the rotors.
Write Your Own Review