WILLALL WR35WS GTR BRAKE COOLING SYSTEM
$1,550.00
Availability : In stock
WILLALL WR35WS GTR BRAKE COOLING SYSTEM
Willall WR35WS GTR Brake Cooling System
Hard driven GTRs place tremendous load on the front brakes. Cracked rotors and delaminated brake pads are the result of this making expensive hardware changes and upgrades a necessity when going to the track.
WR35WS does away with this high wear rate, significantly lowering brake temperatures by automatically injecting a water spray into the centre of the disc under hard driving conditions. A Microprocessor controller feeds water from a 2 gallon tank through CNC machined brackets and into the discs lowering operating temperature by up to 200F and keeping a hard high brake pedal in the most demanding of conditions. Brake pad and rotor life has been extended up to 50% via fitment and use of WR35FS, as well as total braking performance with zero fade guaranteed in even the toughest operating conditions. The result is like much bigger and far more expensive competition brakes, but with the ability to still use 18 inch rims. WR35WS is a must for the serious track day enthusiast.
Each complete Willall Racing WR35WS Brake Cooling System consists of the following parts -
* 1 x 2 Gallon water reservoir
* 1 x WR35WS control loom complete with backlit switch/relays/fully marked
* 1 x WR35WS Programmable control box
* 1 x Threaded Tee piece
* 2 x Stainless Steel braided lines
* 2 x WR35WS Spray jets
* 2 x WR35WS CNC Mounting brackets
* 1 x WR35WS One Way valve
* 4 x P mounting clips
* 6ft Rubber hose
WR35WS does away with this high wear rate, significantly lowering brake temperatures by automatically injecting a water spray into the centre of the disc under hard driving conditions. A Microprocessor controller feeds water from a 2 gallon tank through CNC machined brackets and into the discs lowering operating temperature by up to 200F and keeping a hard high brake pedal in the most demanding of conditions. Brake pad and rotor life has been extended up to 50% via fitment and use of WR35FS, as well as total braking performance with zero fade guaranteed in even the toughest operating conditions. The result is like much bigger and far more expensive competition brakes, but with the ability to still use 18 inch rims. WR35WS is a must for the serious track day enthusiast.
Each complete Willall Racing WR35WS Brake Cooling System consists of the following parts -
* 1 x 2 Gallon water reservoir
* 1 x WR35WS control loom complete with backlit switch/relays/fully marked
* 1 x WR35WS Programmable control box
* 1 x Threaded Tee piece
* 2 x Stainless Steel braided lines
* 2 x WR35WS Spray jets
* 2 x WR35WS CNC Mounting brackets
* 1 x WR35WS One Way valve
* 4 x P mounting clips
* 6ft Rubber hose